Polarstar

The Blackleaf Airsoft Custom Trigger Board is a "Drop in" board that replaces the existing Ares Amoeba ECU trigger system in V2 Ares and Ares Amoeba Gearboxes.Installation allows you to retain all of the original functionality of your selector for...

The REV3 FCU follows the classic design of our very first FCU and it is considered to be the finest fire control units on the market. Since it is equipped with an LCD screen and joystick you are able to easily scroll through menus and precisely adjust...

Bite Sized Fusion Engine Winner of the "Best HPA Engine" in the 9th Airsoft Players Choice Awards, the dual solenoid design of the F2™ provides the same functionality as the legendary Fusion Engine™ but in a more compact, efficient and...

The PolarStar wire harness is constructed with 24 AWG wire for superior continuity and features a nylon mesh sheath to protect the wires as they pass through the replica's body. These harnesses are universally compatible with all PolarStar...

Version 2 switchboard for GEN3 Fusion Engine. Header Identification: J1 = Main Harness, J2 = Poppet Solenoid, J3 = Nozzle Solenoid

The heavy spring is what comes standard in Fusion Engine and F2 HPA systems. It is also the "extra" spring that comes with the Kythera system.

PolarStar JACK Conversion Kit, M249 Made in the USA Velocity: 500fps w/ .20g @ 130psi ROF: 30rps Air Efficiency: 1000+ shots from 13/3000 @ 1.5J w/ .28g Code Name "Simple Jack" The JACK™ was designed to answer the demand for an affordable, high...

#11 Also fits G&P; Stoner.As of July of 2016 we starting to assign numbers to our nozzles instead of using the rifle model. This is because the nozzle length can vary between the same gun model when made by different manufacturers. This can be from the...

PolarStar JACK V2 Conversion Kit, M4/M16 Made in the USA Velocity: 500fps w/ .20g @ 130psi ROF: 30rps Air Efficiency: 1000+ shots from 13/3000 @ 1.5J w/ .28g Code Name "Simple Jack" The JACK™ was designed to answer the demand for an affordable,...

These metering screws are used to adjust the speed of the nozzle as it returns forward. There is a precision orifice through the screw that limits flow into the dump chamber. The smaller the orifice, the slower the nozzle moves.   Size Selection All...

The Kythera has been the most eagerly anticipated products from PolarStar in the past decade. This HPA system is a radical departure from all previous systems that PolarStar has produced since the Kythera does not use a battery, an FCU or any type of...

The Original HPA Rebel The Fusion Engine™ was released in 2011 and was the first new HPA system to hit the airsoft market in over two decades. This is the system that started the HPA revolution and has set the benchmark to which all other systems...

The air nozzles for the Fusion Engine come in up to 6 different colors which identify how much the nozzle restricts air flow out of the engine. The Fusion Engine has an approximate 60 - 100fps window of adjustment depending on the barrel length being...

Male Quick Disconnect (QD) Fitting Assembly for the standard 6mm airline used on all PolarStar HPA systems. Foster 23-2 QD works with all PolarStar Air Rigs. Assembled with 6mm x 1/8PTC fitting to interface with standard 6mm airline.

This compact regulator stands just 3 inches tall and threads directly onto the HPA tank. In so doing it eliminates the need for a separate UFA and keeps your air rig profile to a minimum. What sets this regulator apart from competing models is its...

This switchboard is designed to replace the original trolley type trigger switch in a traditional TM spec V2 gearbox. It is not compatible with variants of the V2 gearbox which use a snap-action/microswitch trigger such as in the Ares V2 gearboxes...